Available in either 400 or 600W versions, the NotePower units are powered by the world's lowest distortion analogue class-D amplification system and power supply.
As with all Chapter amplifier products, the NotePower features a flat distortion character, independent of level. Coupled with almost immeasurable intermodulation distortion and ultrafast "on-demand" power technology, these amplifier duo's represent the new benchmark in high end reproduction. Vocals are strong, proud and clean whilst bass punch is powerfully controlled into the most demanding of loudspeaker loads.
Specification
NotePower 600
| Power: | 1x 350W rms. into 8-Ohms. 1x 700W rms. into 4-Ohms |
|---|---|
| Energy Storage: | >1200 Joules |
| Distortion: | Less than 0.006% THD ref. 1W. |
| Signal to Noise: | Better than 135dB (unweighted) ref 1W into 8-Ohms |
| Frequency response: | 0.5 Hz to 48KHz +0, -3dB 5 Hz to 30KHz +0, - 0.5dB |
| Power consumption: | Max 1.2kW |
| Protection: | Fully electronic on DC error, short circuit output, or continuous overload and/or clipping. |
| Sensitivity: | 26dBV |
| Phase: | Non inverting ref XLR pin 2(+) or phono input. |
| Communication: | Trigger Input & RS232 |
| Dimensions: | 160mm x 250mm x 55mm |
NotePower 400
| Power: | 1x
200W rms. into 8-Ohms. 1x 400W rms. into 4-Ohms |
|---|---|
| Energy Storage: | >350 Joules |
| Distortion: | Less than 0.003% THD ref. 1W. |
| Signal to Noise: | Better than 130dB (A weighted) at full power |
| Frequency response: | 0.5 Hz to 120KHz +0, -3dB 5 Hz to 30KHz +0, - 0.5dB |
| Power consumption: | Max 880W |
| Protection: | Fully electronic on DC error, short circuit output, or continuous overload and/or clipping. |
| Sensitivity: | 26dBV |
| Phase: | Non inverting ref XLR pin 2(+) or phono input. |
| Communication: | Trigger Input & RS232 |
| Dimensions: | 160mm x 250mm x 55mm |